SUMMARY

Proven accomplishments in developing processes and procedures that increases individual and departmental productivity as well as providing the highest level of analysis. Highly motivated self-starter requiring minimal direction to complete assigned tasks in a timely manner.

Special Interest in Digital Communication, QAMs, QPSK, CMTS, (Data Over Cable Service Interface Specification DOCIS) Routing Protocols (OSPF, EIGRP), Internet Fundamentals( IPV4, IPV6, HTTP, DNS, DHCP), Ethernet and the surrounding technology such as Spanning Tree Protocol (IEEE 802.1w and 802.1d), Trunking (IEEE 802.1q),MoCA,802.11n/ac.
Familiar with LAN, VLAN, WLAN, Intranet, OSI layers, CIDR, IP subnetting UDP and TCP, Essential of Cybersecurity, Cryptographic Systems, IPS, IDS, Public/ Private Keys Digital Signatures

Experience with basic network tools (ping, nslookup, traceroute, show ip, configure terminal, Access-Lists)

 

Knowledgeable in Mathematics, Algorithm Design, Quantitative Analysis, Circuit Designing and Computer Programming,

Fluent in speaking: English, French

 

EDUCATION

University of Texas at Arlington

Masters of Science in Applied Mathematics                                                               2012

University of Texas at Arlington

Bachelor of Science Degree in Electrical Engineering                                               2006                          

University of Cocody (Ivory Coast)                                                                          2000                                           

Associate in Computer Mathematics

Trade School of Abidjan (Ivory Coast)                                                            

Associate of Business in Finance (Financial Inspector)                                         2000                                

 

TRAINING AND CERTIFICATES

 

·   CCNA Security                                                                           December 2015                                                                          

·   CCNA 3                                                                                           October   2015  

·   CCNA 2                                                                                           July       2015                                                                    

·   CCNA 1                                                                                          May     2015

·   Impact of Going All Digital (SCTE) 

·   Understanding Wireless Home Networking Technology (SCTE)

·   Fundamentals of IP Networking in Cable Networking (SCTE)

·   DOCSIS Engineering Professional (SCTE)

·   Broadband Distribution Specialist (SCTE)

·   Understanding Fundamentals of Cable Technology (SCTE)

·   V8i Bentley Certificate, Pivot Tables, Radio Frequency Amplifier Basic, Controlling Project Cost , Excel 2003 Analyzing and Managing Data

·   (OSP) Plan Engineering and AutoCAD

OptiNT (AT&T Tool for drafting)

 

 

 

COMPUTER AND ENGINEERING TOOLS

. DOCK 3.2, SALESFORCE, UNIFIED, PEOPLESOFT

. MATLAB, MAPLE for Programming, Calculations, Tables, Charts, Graphs

. FORTRAN/TELPLOT for Programming, Calculations, Tables, Charts, Graphs

. Microsoft Office: Word, Excel, Outlook, Access and PowerPoint

. C for Programming, SnagIt

. AutoCAD, Bentley, Mircrostation, Greenshot Google Earth for Drawing and Positioning.

. DREAMWEAVER for WEB design

 

WORK HISTORY

 

 Time Warne Cable                                                                        April 2013-Present

HFC Designer/Permit Coordinator                                                          Coppell, TX

Design and Draft FTTP, EPON, and/or HFC optical networks using multiple tools (Bentley, AutoCAD) and CATV standard terminology
Analyze the convenient way to expand the Fiber or Coax network (Node Split, Node Segmentation). Map Markups, Unified and Address Dump, New node naming, Commercial, Residential, MDU.

Design Upstream/Downstream Coax Circuit with different areas specifications. Key elements of the task are to:

-Understand dB and dBmV, Bandwith and Frequencies.

-Know and Understand Attenuation and Insertion Loss.

-Know and Understand the differences and how Splitters, DC’s and Taps Function.

-Know and understand the difference Tap output specifications and how they apply in RF design.

-Know and Understand amplifier types and cascade what their different functions are.

-Understand how to read and use an equipment specification data sheet.

-Calculate Cable, Directional Coupler, Splitter and Tap losses.

-Calculate and select correct Tap values based upon design specifications.

-Understand amplifier inputs, outputs, Pads and become familiar with Equalizers.

-Understand and Apply Unity Gain

-Understand and use Amplifier data blocks and EOL Data Blocks  

Serve as technical liaison for construction and technical operations group

Draw accurate routing conclusions that reflect cost estimate for the availability request

Documents as-build updates for project reconciliation
 

Allegis Group – Aerotek                                                       July 2012-February 2013                          

 Method Analyst                                                                                        Arlington, TX

Analyzed the series steps needed to manufacture some metal piecework for aircraft weighting system. Programmed the G-codes that are used for the realization of the finished product. Created operation sheets, tool orders, sketches, dimensional charts, material operation diagrams and lists. Adjust dimensions for fit and function and to secure Engineering changes when required.
 

Frog Tutoring (Part Time)                                                           May 2012-   Present

Math/Physics Instructor                                                                            Dallas, TX

Provide academic assistance in Algebra, Calculus, Differential Equations, Statistics, Probability, Geometry, and Physics to students in need at various grades and levels across the Dallas Fort-Worth Metroplex.

 

 

 

 

 

DCCCD                                                                                 April 2012-    December 2012                   

FORT WORTH ISD                                                                      April 2010-   June 2011

UNIVERSITY OF TEXAS AT ARLINGTON                    December 2005-December 2008

Math Tutor

Determined Students Expectations (SE) for high- need, low-income students. Explained fundamentals of Algebra, Calculus, Trigonometry, and Geometry to high-school and college students and Advance Math to college students. Assessed some assignments to students and graded their performances. Gave some Calculator tutoring sessions using a TI-83 or TI-89. Applied Bloom’s Taxonomy Principle and Cornell’s Note Taking System to develop efficient learning strategies. Participated in various meetings with the teachers to be aware of the new teaching strategies.

 

AT&T (Internship)                                                                                                   San Jose, CA                                                

OSP (Field) Engineer

 

· Determined Right Of Way (ROW), General Pole Agreement (GPA) and how to used them efficiently

·   Developed sketches and layout for Fiber To The Premise (FTTP) on the green field and Fiber To The Curb (FTTC)

·   Determined the count the pairs of copper cables and connect the cables form the SAI to the Manholes, Handholes and splicing boxes

·   Designed the path for the Copper and Fiber to and out of the VRAD (Alcatel made) cabinet.

·   Justified the use of bumper post, retaining walls in order to prevent damages on the cabinets

·   Designed the traffic control system involved in the trenching of the streets in the installation of the fiber. Traffic control includes taking pictures of the area, finding other utilities in the area (gas, sewer, water) using traffic cones, reversible signs (stop, slow down)

SOME RELEVANT COURSEWORK

Government, Calculus, Macroeconomics, Applied Mathematics, Differential Equations and Linear Algebra, Mathematical Analysis, Calculus of Variation, Control Systems, Linear Algebra, Digital Signal Processing, Introduction to MEMS, Linear Systems Analysis, Probability and Random Signals, Power Systems, Semiconductors and Telecommunication, C, Web Programming.

 

PROFESSIONAL ASSOCIATIONS AND AWARDS

·   SIAM (Society for Industrial and Applied Mathematics) ID #20029884

·   SCTE (Society of Cable Telecommunication Engineers) ID # 256870

·   UTA Alumni association.

·   Alpha Chi

·   University of Texas at Arlington Transfer Scholarship.

·   Phi Theta Kappa Scholarship

·   UTA Engineering Honor Roll

 

Volunteering and Community Services

River Legacy                                                                                               Arlington, TX

Dallas Perot Museum                                                                                      Dallas, TX    

American Red Cross Disaster Center                                                         Arlington, TX 

 

.